Skip to content

Stealth Hidden Trailer Hitch (SHR31026) | Fully Concealed 2" Receiver for BMW X5 sDrive 35i, xDrive 35d, 35i & 50i (2014-2018)

$668.00
Kit
  • Affirm
  • Afterpay
  • Amazon
  • American Express
  • Apple Pay
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

THE HITCH MADE TO BE HIDDEN | MADE IN USA | LIFETIME WARRANTY

Custom-engineered for the BMW X5 sDrive 35i, xDrive 35d, 35i & 50i (2014-2018). Completely concealed behind the bumper — visible only when you want it to be.


Tow 8,000 lbs Without Ruining Your X5's Lines

The Stealth Hidden Trailer Hitch (SHR31026) mounts entirely behind your bumper, so your X5 keeps its factory look. Drop in the detachable ball mount to tow, swap to the 2" receiver to run a bike rack or cargo carrier, and remove both for a completely invisible finish when you're done. No tools required — everything latches into a stainless steel block and locks in seconds. No welding, no drilling, no visible cutouts.

✓ Fully hidden design — no visible cross tube or bumper cutouts

✓ Tows up to 8,000 lbs (GTW) / 800 lbs tongue weight

✓ Detachable 2" square rack receiver for bike racks & cargo carriers

✓ Tool-free, lockable ball mount with integral lock

✓ Keeps the X5's factory rear end intact

✓ Stainless steel latch block + powder-coat finish for corrosion resistance

✓ Made in the USA — backed by a limited lifetime warranty


Choose Your Kit

All options install the same hidden hitch beam (SHR31026) and the same stainless steel latch block. The difference is whether you want towing capability now or just rack carrying, and which wiring harness your setup needs.

Kit Who It's For Price
Rack Package Bike racks, ski racks & cargo platforms only — not for towing. No wiring harness needed. $668
Tow + Rack Combo (Stealth Harness) Full towing, Stealth harness. Adds the detachable ball mount, 2" ball and the Stealth wiring harness (kit SHT25011). Right for most trailers. Does everything the Rack Package does. $967
Tow + Rack Combo (Active Harness) Full towing, Active harness. Uses the vehicle-specific active wiring kit SHT25012A with a 7-way connector. Choose this if you tow with electric trailer brakes or need the 7-way socket. $1,397

Not sure which to pick? If you only carry bikes or cargo, the Rack Package is all you need. For towing, the Stealth harness suits most trailers; choose the Active harness if you need a 7-way socket or run electric trailer brakes. You can convert a Rack Package to tow later for the same total cost.


What's Included

Rack Package: hitch beam (bolt-up design), stainless steel latching mechanism w/ integral lock, detachable 2" square rack receiver

Tow + Rack Combo adds: detachable ball mount, 2" ball, wiring connector, wiring harness and controller, and chain anchors for safety-chain connection


Why a Detachable Ball Mount Rides Better

The Combo Package uses a detachable ball mount that works differently from a typical square-tube receiver. When inserted into the stainless steel receiver block it creates a tight connection to the vehicle frame, eliminating the jerking and banging you get from square-tube hitches during starts and stops. Less wear on the drivetrain, and a smoother ride for everyone in the car.

Stealth Wiring Harness

The Stealth harness and controller monitor and duplicate the tail light functions rather than drawing current from the tail light circuits, which can throw faults on EV platforms. The controller draws directly from the battery to avoid that entirely.


Technical Specifications

Part number SHR31026
Gross trailer weight (GTW) 8,000 lbs
Tongue weight (TW) 800 lbs
Rack receiver capacity 600 lbs (2" receiver) / 300 lbs (1-1/4" receiver)
Towing conversion kit SHT25011 / SHT25012A (upgrade a Rack Package to tow later)
Construction Fully welded beam, stainless steel latch block, powder-coat finish
Origin / Warranty Made in USA / Limited lifetime

Do not exceed the weight ratings of the hitch, trailer, or vehicle. See trailer and vehicle manufacturer information for ratings. Towing reduces EV range — plan charging stops accordingly.


Fitment

2014-2018 BMW X5 sDrive 35i (& M-Sport)

2014-2018 BMW X5 xDrive 35d (& M-Sport)

2014-2018 BMW X5 xDrive 35i (& M-Sport)

2014-2018 BMW X5 xDrive 50i (& M-Sport)

Not sure about your trim or package? Send your VIN and we'll verify fitment before you order.


Why Owners Choose Stealth

✓ Completely hidden when not in use — your X5 looks factory

✓ No visible cutouts in the bumper

✓ No welding or drilling required

✓ Protects the vehicle's crumple zone design

✓ No permanent attachments hanging under the vehicle — no knee or shin bangers

✓ Integral theft-resistant lock and key


Installation & Documents

No welding or drilling required — the hidden hitch bolts up behind the bumper while maintaining your X5's ground clearance. Owners typically report a multi-hour install; we strongly recommend professional installation for correct alignment and finish.

Installation Instructions (PDF)

Operating Instructions (PDF)

EV Bandit installs in-house at our Los Angeles shop — see our installation services, or we'll help you find a certified installer near you.


Shipping

✓ FREE U.S. shipping


WARNING (Prop 65): This product can expose you to chemicals including Nickel, known to the State of California to cause cancer. See www.p65warnings.ca.gov. Questions about fitment, wiring, or installation? Email support@evbandit.com — we respond within 24 hours.

Sale

Unavailable

Sold Out