TESERY Wireless Magsafe Mount for Tesla Model 3/Y/S/X/Cybertruck
Hidden magnetic phone mount for Tesla screens
Keep your phone close without adding a bulky dashboard arm.
This slim aluminum mount attaches behind a compatible Tesla center screen, then folds or slides out when you need a clear, adjustable viewing position. It is a magnetic holder—not a standalone wireless charger.
- 12 N52 magnets
- Retractable arm
- Horizontal or vertical viewing
- MagSafe + metal-ring support
The product in five points
A screen-mounted holder designed around the Tesla cabin.
- Uses the space behind the screenThe low-profile base sits behind a compatible center display, keeping the dashboard area visually cleaner than a long free-standing arm.
- 12 N52 magnets for quick placementThe circular magnetic face helps a compatible phone or case align quickly. Actual holding strength varies with phone weight, case thickness and road movement.
- Retractable aluminum armSlide the arm to set reach, then fold it back when the mount is not needed. Check that the screen edge and surrounding trim remain clear.
- Portrait or landscape viewingThe ball joint lets you set the phone horizontally or vertically. Adjust the angle before driving and keep the display and road view unobstructed.
- MagSafe-first, metal-ring compatibleMagSafe iPhones and compatible cases can attach directly. Other phones or cases need the supplied metal ring, applied to a clean surface and tested with your case.
Fitment is a clearance check
The vehicle badge is only the starting point.
Install only where the screen area allows it
- Flat, clean space behind the center screen for the 3M-backed base
- Arm can extend without blocking screen controls, vents or the driver’s view
- Phone can be reached without crossing the steering-wheel or airbag area
Every Tesla year and trim is identical
- Current product photos mainly show Model 3/Y installations from the 2017–2023 era
- Model S, Model X and Cybertruck screens may have different rear clearances
- Curved trim, aftermarket screen protectors or thick cases can change the fit
This is a surface-mounted accessory, not a replacement Tesla part. Measure the available rear-screen area and confirm that the arm, phone and cable will not interfere with controls or visibility.
Magnetic holder, charging explained
Mount the phone first. Bring your own charging setup.
The mount positions your phone; it does not replace a USB cable, power adapter or Qi/MagSafe charging puck. If you use wireless charging, the phone and charger must support it and the magnetic ring or case position must leave the charging coil aligned.
- MagSafe iPhone/case: attach directly to the magnetic face
- Other phone or non-magnetic case: apply the supplied ring and test the grip
- Wallets, cards, batteries and thick or textured cases can reduce magnetic contact
- Remove the phone before changing a cable or adjusting the mount
Clean and dry the case before applying the ring. Adhesive rings may not reposition cleanly, and wireless charging performance should be checked with your own phone, case and charger.
Install, align, then test
A careful first installation protects the screen trim.
- Dry-fit the positionHold the base behind the screen and extend the arm. Confirm reach, cable path and visibility before exposing the adhesive.
- Clean the contact areaUse a clean, dry, residue-free surface. Do not install over dust, loose trim, fabric or a wet panel.
- Apply and pressRemove the 3M pad liner, place the base once, and press evenly across the contact area. Follow the adhesive maker’s settling guidance before loading it.
- Test with your phoneStart with the phone bare or in its intended case, check the magnetic hold and adjust the arm while parked.
Warmth and slow, even lifting can help release adhesive, but no accessory adhesive can promise zero residue or zero risk to every trim finish. Never pry against the screen or force the base.
TESERY video reference
See the mount in use, then make the final fit decision from your car.
TESERY magnetic phone mount overview
Magnetic holder placement and use
In-car use reference
Product facts
What is included and what to verify.
| Item | Current product information |
|---|---|
| Product type | Aluminum magnetic phone mount for a compatible center screen |
| Magnetic face | 12 N52 magnets; MagSafe-compatible phones/cases can attach directly |
| Phone compatibility | Non-MagSafe phones or cases require the supplied metal ring; thick cases and accessories may reduce contact |
| Mounting | 3M-backed adhesive base applied behind the screen; surface and clearance must be checked first |
| Adjustment | Retractable/sliding arm with ball-joint angle adjustment; portrait or landscape viewing |
| Material / color | Aluminum alloy / silver |
| Dimensions | Approximately 130 × 57 × 7 mm |
| Package | 1 × magnetic phone mount, 1 × metal ring, 1 × accessories package (as listed) |
| Charging | Mounting hardware only. Wireless charging requires a compatible phone and separate charger; verify coil alignment with any metal ring or case. |
Before you order
MagSafe mount FAQ
Is this a wireless charger?
No. It is a magnetic phone mount. Use your own cable or compatible Qi/MagSafe charger if you want to charge while the phone is mounted.
Will a non-MagSafe phone work?
Usually, when the supplied metal ring is correctly applied to a suitable case or phone surface. Test the ring position and magnetic hold before driving; some finishes and thick cases reduce adhesion.
Does the ring preserve wireless charging?
Charging performance depends on the phone, case, ring position and charger. Align the charging coil and test your exact setup. A ring can reduce or prevent charging if it sits over the coil.
Will it fit every Tesla Model 3, Y, S, X or Cybertruck?
No universal guarantee is made. Fit depends on rear-screen space, trim shape, phone clearance and the model year. The current photos mainly document Model 3/Y installations, so compare your vehicle before ordering.
Will the mount block the Tesla screen or my view?
It is designed to sit behind the screen with an adjustable arm, but the final position depends on your car and phone. Set the angle while parked and keep controls, airbags and the road view unobstructed.
Does the 3M pad leave residue?
Adhesive behavior varies by surface, temperature and removal technique. Remove slowly and carefully; no adhesive can guarantee zero residue or zero trim risk on every vehicle.
Can I use it with a thick case or wallet?
Thick, textured cases, wallets and card holders can reduce magnetic contact. Remove extra accessories or use a compatible magnetic case and test the hold.
What is included?
One magnetic phone mount, one metal ring and one accessories package, as listed for this product. No separate wireless charging puck is included.
Is it safe to adjust while driving?
No. Install and adjust the phone and arm only while parked. Keep attention on the road and follow local hands-free laws.