Teslas Can Now Plug In and Autocharge at IONNA. How It Works, and When You Still Need an Adapter
Tesla drivers can now pull into an IONNA station, plug in and walk away without tapping a card. IONNA switched on Autocharge for Teslas this week, run through the Presto Charging app, as it opened its largest site yet: 22 bays of 400 kW charging in Westminster, California, Electrek reported on Nov. 18. Drive Tesla and GM Authority covered the rollout too.
For owners who live on Superchargers, it is one more network that behaves the way a Tesla expects. It also brings back an old question: what do you do when the NACS stalls are taken? At Westminster, 12 of the 22 bays have CCS connectors, according to Electrek. That is where an adapter earns its spot in the frunk.
At a glance
- What: Autocharge for Teslas at IONNA, available only through the Presto app, according to The EV Report.
- Cost: your first Autocharge session is free, then IONNA's regular pricing applies, per Drive Tesla. Westminster opened with a promotional $0.20 per kWh for its first weeks before IONNA's standard $0.39 per kWh, Electrek reports.
- Power: up to 400 kW at the charger. Your car and any adapter set the real limit.
- Network: more than 220 locations, according to IONNA's announcement as reported by GM Authority.
- Next: Stellantis owners are due to get Autocharge in December.
“Westminster is the embodiment of reliable, affordable, and convenient charging.”IONNA CEO Seth Cutler, via GM Authority
How to set it up
One-time setup, per Presto's support documentation as summarized by Drive Tesla
- Download the Presto Charging app, open the Account section and choose Verify your Tesla.
- Scan the VIN label on the driver's door frame.
- Start your first IONNA session manually in the app and tap Enable when prompted.
- After that, sessions start when you plug in, and the app handles payment.
Technically, this is not Plug & Charge. Drive Tesla explains that Plug & Charge relies on digital certificates, while Autocharge recognizes the car by its charging port's network address. For the driver, Electrek calls it “basically the same thing.” If Autocharge ever balks, IONNA sites still have card terminals, and the Presto app can start a session by hand.
NACS bay or CCS bay?
Drive Tesla reports IONNA stations offer both NACS and CCS connectors, and the mix varies by site. Westminster has 10 NACS and 12 CCS, per Electrek. Network-wide, Axios reported in May 2025 that about 60% of IONNA bays had CCS and 40% had NACS, a ratio IONNA expected to shift as NACS spreads. That figure is 18 months old, so treat it as a rough guide.
On a NACS bay, plug in and go. On a CCS bay, a Tesla needs a CCS1-to-Tesla adapter, and the car itself has to support CCS. Check before you buy: Controls > Software > Additional Vehicle Information > CCS Adapter Support should read Enabled. Each adapter listing below repeats that check.
The three adapters we stock do the same job. They differ on price, weather sealing and what the seller claims for speed:
| Adapter | Price | Listed rating | Sealing | Seller speed claim | Listed coverage |
|---|---|---|---|---|---|
| Tesery CCS1 Adapter for Tesla | $81.99 | 500V / 300A DC | IP54 | None in kW | Refund or replacement within 30 days if damaged or unfit |
| CCS Adapter for Tesla Model 3, Y, S and X | $140.99 | 500V / 300A | IP65 | Up to 150 kW in the description; the listing title says 250 kW | Free replacement within one year |
| EV Bandit Upgraded CCS1 to Tesla Adapter | $189.99 | Up to 400A | Not listed | Up to 250 kW peak | 365-day warranty |
Speed figures are sellers' claims. Actual charging speed depends on your car, the station, the weather and your battery's state of charge.
1. Tesery CCS1 Adapter for Tesla: the budget pick

The cheapest way into a CCS bay. The listing rates it at 500V and 300A for DC, gives an IP54 rating and an operating range of minus 30 to 50 degrees Celsius, and says it also handles slower charging through a covered second head. It is in stock now.

Shop the Tesery CCS1 Adapter, $81.99
2. CCS Adapter for Tesla Model 3, Y, S and X: the weather-sealed middle option

This one lists an IP65 rating, a step up in water resistance on paper, plus the same 500V and 300A ceiling as the Tesery. One honest caveat: the description says up to 150 kW, while the product title mentions 250 kW. We quote the lower number. Either way, it is available to order now.
Shop the CCS Adapter for Model 3, Y, S and X, $140.99
3. EV Bandit Upgraded CCS1 to Tesla Adapter: the one that lists Cybertruck

If you drive a Cybertruck, this is the adapter in our lineup whose listing names it. The seller claims up to 400A and up to 250 kW peak, and the listing comes with a 365-day warranty. Owners of Teslas built before 2021 should confirm CCS support first, as the listing warns. Available to order now.

Shop the EV Bandit CCS1 Adapter, $189.99
What this means for owners
Superchargers are still the default for most Tesla road trips. IONNA's move matters because it removes the friction that kept many owners away: no card, no app tap after the first session. Set up Presto before you need it, since the first session is free, and if your car supports CCS, an adapter turns every bay at a mixed site into a usable one, not just the NACS half.
What we could not confirm
- Whether Autocharge works through a CCS1 adapter on a CCS bay. If it does not start on its own, use the Presto app or the card terminal.
- How long Westminster's $0.20 per kWh promotion lasts. Electrek says it covers the first weeks.
- The NACS and CCS mix at any given IONNA site. Check the bay before you plug in.
Planning around busy chargers? Read our guide to Tesla's new Supercharger Waitlist and our look at home charger options as Wall Connector prices rise.
Tried IONNA in your Tesla yet? Tell 170,000 owners how it went in the Tesla Model Y Owners group on Facebook.
Sources
Electrek, Nov. 18, 2026: IONNA Westminster and Tesla Autocharge
Drive Tesla (Matt Wilson), Nov. 16, 2026
GM Authority: IONNA road trips and Westminster
The EV Report: IONNA Autocharge for Tesla and Stellantis
Axios, May 14, 2025: IONNA connector mix